Albaabka PVC iyo Khadka Daaqadda Profile Extrusion
Qiimaynta mashruuca
Marka loo eego shuruudahaaga, waxaan jeclaan lahayn inaan kugula talino SJZ65/132 Khadka Bixinta Profile PVC.Khadkaan extrusion wuxuu ka kooban yahay SJZ65/132 Conical Twin-screw Extruder iyo mashiinka caawiyaha hoose.Fadlan hubi macluumaadka hoose:
1.1 Astaamaha alaabta
1.1.1 walxaha ku salaysan:
- budada PVC:
- CaCo3:
1.1.2 Wax lagu daro:
- Isku-xidhka
- Saliid
- 1.1.3 Qaabka agabka
- Dhammaan walxaha waa in si buuxda loo qaso.
Alaabta la dhammeeyey: Profile PVC;
Awoodda wax-soo-saarka: 150 ~ 250kg/saacaddii (waxay kuxirantahay wax soo saarka la dhammeeyay).
Dhammaan khadka wax soo saarka waxaa ka mid ah:
Raadiyaha budada balaastikada ah → SJSZ65/132 konical twin screw extruder
Tilmaamaha farsamada
SJZ65/132 PVC Profile line extrusion
| Maya | Magaca | Sawirka mashiinka | Qty. | Tilmaamaha farsamada | |
| 1 | ZJ300 quudiye |  | 1 | Awood gudbinta la qiimeeyay: 300kg/h | |
| Awoodda matoorka: 1.5kw Dhexroorka guga: Φ36mm Qalab: bir aan lahayn | |||||
| 2 | SJZ65/132 conical twin-screw extruder |  | 1 | 2.1 fur 2.2 foosto 2.3 matoorka wadista 2.4 habka quudinta 2.5 Nidaamka vacuum 2.6 Adapter 2.7 Golaha korontada ugu weyn Nidaamka is-ilaalinta | |
| 2.1 Xabaal:Dhexroor koroon 65/132 mm tuubada PVC iyo tuubada sahayda biyaha. Walxaha furka: 38CrMoAl Daawaynta dusha sare: Habaynta nitriding, dhumucda: 0.6 ~ 0,8mm, Polishing Xawaaraha wareega (mashquulka wareega): 1-34.7 rpm/min 2.2 Foostada: dhexroorka koonaha ah 65/132 Habka gudaha: nitrided leh dhumucdiisuna: 0.6 ~ 0.8mm Aagagga kuleylka: 4 Habka kuleylinta: Cast alumina + daboolka birta ah Awoodda kuleylka: 22kw Habka qaboojinta: Taageerayaasha hawada: 3 sets 2.3 Matoorka wadista: Awoodda matoorka: 37Kw Nooca matoorka = AC 2.4 Nidaamka quudinta: Cuf-isjiidadka iyo nidaamka quudinta qiyaasta qiyaasta Iyada oo leh hopper birta ah Habka quudinta qiyaasta: Matoorka: 1.5Kw Shaadhka quudinta oo leh qaboojin biyo wareeg ah 2.5 Nidaamka humidaynta faaruqinta: Bamamka faakiyuumka: 1 set Darajada Vacuum = 0 ~ 0.075 Mpa 2.6 Adaptor: (Qaybta qulqulka): Qalabka: #40stel Chrome oo dahaadhay, nooca qulqulka isku xidha ee gudaha Habka isku xirka ee dhinta: xannibaadda xannibaadda + bolt Dareemaha dhalaalidda cadaadiska iyo kulaylaha 2.7 Qaybaha korontada ugu muhiimsan: Beddelka: ABB ama DELATA Xiriiriyaha: Schneider ama SIEMENS Bedelka Hawada: Schneider Relay: Cumar Xakamaynta heerkulka: RKC 2.8 Nidaamka is-ilaalinta: In ka badan ilaalinta matoorka hadda Cadaadis badan oo ka ilaalinaya furka. | |||||
| 3 | Madal Calibration YF240 |  | 1 | 3.1 cabbirka dibadda 3.2 vacuum bamka 3.3 Bamka biyaha 3.4 Saddex jiho hagaajin: Qeybta biyaha ee xiriirka waxaa lagu sameeyaa birta aan la taaban karin. | |
| 3.1 Cabirka dibadda: Lx W x H: 6000x1100x1000mm (la hagaajin karo) 3.2 Bamamka faaruqinta: Bamka faaruqinta: 3x5.5KW; Asal ahaan: Yuanli, Shiinaha 3.3 Bamka biyaha: Bamka biyaha: 1×4KW; Asal ahaan: Guangzhou, Shiinaha 3.4 Saddex jiho hagaajin: Hore iyo gadaal oo leh 0.75 kw matoor Qiyaasta: ± 1000mm Kor iyo hoos, bidix iyo midig gacanta lagu hagaajiyay Qiyaasta: kor iyo hoos: ± 150mm Dhaqdhaqaaqa BIDIX iyo MIDIG: ± 50mm | |||||
| 4 | DYⅢQ Ka saarista iyo gooyuhu (lagu daray) |  | 1 | 4.1 Ka-soo-bax 4.2 Cutter | |
| 4.1 Ka-soo-bax Xawaaraha ka-saarista: 0-3m/min; Awoodda matoorka: 5.5KW; Ballaca diirka: 210mm; Dhererka diirka: 2200mm; Xakamaynta pneumatic; Qabso holip ama beddelka ABB; 4.2 Cutter Awoodda matoorka: 2.2KW; Awood ururinta qashinka: 1.5KW; Dhexroorka miinshaar: 500mm; Qiyaasta goynta: 200mm; Qalabka qashinka lagu ururiyo; | |||||
| 5 | Miiska talo bixinta |  | 1 | 5.1 Miiska talo bixinta: Dhererka Habka xakamaynta Qiyaasta hagaajinta dhererka | |
| Dhererka:6,000mm Habka xakamaynta:Pneumatic Iyada oo leh boolal lagu hagaajinayo kala duwanaanshaha dhererka:0 ~ 180mm | |||||
6.Qalabka isku dhafka ah
1. Codsiga:
Isku qas alaabta ceeriin
2. Waxa soo baxay: ≤500
3. Qaybaha qalabka:
① qaseeyaha kulul
② qaboojinta qasiyaha
③ autoloader
4. Parameter
| Qaabka | / | Kooxda isku dhafka ah ee SRL-Z300/600 | ||
 | ||||
| 1 | Isku-darka kulul | |||
| 2 | mugga guud ee qasaha kulul | L | 300 | |
| 3 | mugga waxtarka leh ee isku-darka kulul | L | 225 | |
| 4 | miisaanka alaabta / dufcad | ㎏/ Dufcaddii | ≤100 | |
| 5 | Wax soo saarka | ㎏/h | ≤500 | |
| 6 | awoodda motor | KW | 40/55, matoor xawaarihiisa laba jibaaran | |
| 7 | awoodda kululaynta | KW | 12 | |
| 8 | isku-dhafka kulul xawaaraha wareega | r/min | 475/950 | |
| 9 | Tirada daabka walaaqaya | kombiyuutarada | 3 (1Cr18Ni9Ti) | |
| 10 | waqtiga isku dhafka | daq/dufcad | 8-10 | |
| qaboojinta qasiyaha | ||||
| 1 | qaboojinta mugga qasiyaha | L | 600 | |
| 2 | mugga waxtarka leh ee qaboojinta qaboojiyaha | L | 450 | |
| 3 | awoodda motor | KW | 11 | |
| 4 | maaddada qaboojiyaha qaboojiyaha | / | ZG1Cr18Ni9Ti | |
| 5 | daabka walaaqaya xawaaraha wareega | r/m | 130 | |
| 6 | habka xakamaynta wiishka | / | sambabada | |
| 7 | Habka qaboojinta | / | biyo qaboojin | |
| 8 | waqtiga qaboojinta | daq/dufcad | 10-12 | |
| Korontada | ||||
| 1 | Xiriiriyaha AC | / | Schneider | |
| 2 | Xakamaynta heerkulka | / | Cumar | |
| Autoloader | ||||
| 1 | Dhexroorka tuubada gaadiidka | mm | 101 | |
| 2 | Ku dallaca awoodda matoorka | KW | 1.5 | |
| 3 | Ku riix awoodda matoorka walxaha | KW | 0.55 | |
| 4 | Mugga kaydinta | kg | 80 | |
| 5 | Maaddada hopper iyo tuubada kaydinta | / | Bir daxal laheyn | |
7 burburiyaha caaga ah (ikhtiyaar)
Codsiga: burburi qashinka qaybaha PVC ee dib u warshadaynta
| model | SWP- 400 |
 | |
| Dhexroorka baalasha wareega | 400mm |
| Tirada daabka wareega | 5 |
| Xawaaraha wareega | 500r/min |
| Tirada daabka go'an | 2 |
| Daloolka shaashadda (mm) | 10 |
| Awoodda burburinta | 350-450 kg/h |
| Awood (kw) | 13.2 |
| Afka quudinta (mm) | 375*320 |
| Miisaanka (kg) | 980 |
| Cabbirka (mm) | 2500*1200*2000 |
8. Burburiyaha PVC (ikhtiyaar)
Codsiga: shii qaybo PVC la jajabiyey oo budo ah
 | |
| Dhexroorka qolka burburinta (mm) | 400 |
| Tirada rotor | 3 |
| Xawaaraha usheeda dhexe (r/min) | 3400-3700 |
| Awoodda baabuurka (kw) | 30 |
| Awoodda wax-soo-saarka (kg/saacaddii) | 50-150 |
| Miisaanka (kg) | 1000 |
Khadka socodka iyo qaabeynta ee khadka wax soo saarka profile PVC
Codsiga
Waxa loo qaybiyaa habka furitaanka:
Daaqad go'an, daaqada laalista sare, daaqada ganaaxa dhexe, daaqada hoose ee ka laalaadsan, daaqad toosan, daaqad furan, dariish fidsan, daaqad jiid, albaab iyo dariish si siman u furan, albaab iyo dariishad simbiriirixan, riixo fidsan, albaabka laablaaban, il dhulka albaabka, kor u qaadida albaabka silbashada, riix jiid albaabka laablaaban, albaab simbiriirixan dhabarka gudaha.
Profile PVC wuxuu leeyahay sifooyin sida kala soocida codka, nuugista codka, kala soocida kulaylka, ilaalinta heerkulka, iwm.Maaddadu waa mid aan guban karin, waa ammaan in la isticmaalo.
Dhammaan alaabooyinka taxanaha ah waxay leeyihiin hanti caddaynta qoyaanka, caariyaysiga caariyaysiga, caabbinta biyaha, saameynteeda u adkaysiga gariirka haddii ay wanaagsan tahay.Dhammaan alaabooyinka taxanaha ah waxay leeyihiin hanti caddaynta cimilada, dhalaalkeedu wuxuu ahaan karaa weligiis, ma fududa inaad gabowdo.Alaabtani waa iftiin, kaydinta & gaadiidka, dhismuhu waa ku habboon yahay.Alaabtan waxaa lagu shaqeyn karaa qalabka caadiga ah ee alaabta alwaax.Qodista, qodista, cidiyaha, qorshaynta, isku xidhka waxa loo samayn karaa sida walxo alwaax ah.Waxay ku habboon tahay qaabaynta kulaylka, foorarsiga kulaylka iyo habaynta laalaab.Waa la isku dhejin karaa, sidoo kale waxaa lagu dhejin karaa waxyaabo kale oo PVC ah.Oogada alaabtani waa siman tahay, waa la daabici karaa. (Nadiifi dusha ka hor inta aanad daabacin.)
